Welcome to the limited company of Shandong Hengrui in new building materials.
The development, production and sale of fly ash aerated concrete blocks and wall panels
development of the society
a step towards success and achievement of strength in all aspects
to meet the growing demand and the changing scenario,research becomes an essential toor for upgrading products.

Your Position: home » product display » Autoclaved ash aerated concrete wallboard

Autoclaved ash aerated concrete wallboard
The development, production and sale of fly ash aerated concrete blocks and wall panels
Autoclaved ash aerated concrete wallboard

Autoclaved ash aerated concrete wallboard

click:   date:2017-05-20

Return

Product description

Autoclaved aerated concrete slab

Autoclaved aerated concrete slab uses silica sand (fly ash), cement and lime as the main raw material. It enhances by rebar with rust prevention, and then becomes aerated concrete product with high temperature, high pressure and steam curing. Its performance of sound insulation and absorption are both excellent. It also has other good performances, such as fire resistance, fire protection, sound insulation, heat insulation and thermal insulation, etc. The proportion of light weight is 0.5, which is the 1/4 of ordinary concrete, thus greatly reduces the self-weight of the wall and the building base cost. The products include exterior wall board, interior wall board, floor board and roof panel. 

 

Execution Standard: GB15762-2008 Autoclaved aerated concrete slab 

 

Characteristics 

Autoclaved lightweight aerated concrete plate (ALC board, also known as AAC) can length processing after actual measurement and it is the prefabrication for the factory with high precision, planning, sawing and drilling. Adopt dry operation with easy installation and process, which greatly shortens the working period and improves the efficiency and the quality of construction. 

ALC panel is enhanced by a double, two-way antirust rebar, and the single point can bear 120 kg. Then it experiences high temperature, high pressure and steam curing. Its shrinkage is small in the inorganic materials and can be prevented from cracking with special polymer adhesive sealing. 

 

 

Ash aerated panel 

The main materials are coal ash, which has better performance of heat insulation, noise reduction, fire retardant, anti-permeability and anti-shock. The prefabrication for the factory with easy installation and economical cost, and can be used as the partition wall board and the outer wall board of the building.